Placa Mãe ITAUTEC - ST4273

Placa Mãe ITAUTEC - ST4273

Descrição Geral

Placa Mãe ITAUTEC - ST4273(SEM ESPELHO)

 

 

  • CPU
    1. Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/ Intel® Core™ i3 processors/Intel® Pentium® processors/Intel ®Celeron® processors in the LGA1155 package
    2. L3 cache varies with CPU
    (Some Intel® Core™ processors require a graphic card, please refer "CPU support List" for more information.)
  • Chipset
    1. Intel® Q77 Express Chipset
  • Memory
    1. 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
      * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
    2. Dual channel memory architecture
    3. Support for DDR3 1600/1333/1066 MHz memory modules
    4. Support for non-ECC memory modules
    (Please refer "Memory Support List" for more information.)
  • Onboard Graphics
    Integrated Graphics Processor:
    1. 1 x D-Sub port
    2. 1 x DVI-D port, supporting a maximum resolution of 1920x1200
      * The DVI-D port does not support D-Sub connection by adapter.
    3. 1 x HDMI port, supporting a maximum resolution of 1920x1200
    4. 1 x DisplayPort, supporting a maximum resolution of 2560x1600
  • Audio
    1. Realtek ALC887 codec
    2. High Definition Audio
    3. 2/4/5.1/7.1-channel
    4. Support for S/PDIF Out
  • LAN
    1. 1 x Intel GbE LAN chip (10/100/1000 Mbit)
  • TPM
    1. Infineon TPM controller on board
  • Expansion Slots
    1. 1 x PCI Express x16 slot, running at x16 (PCIEX16)
      (The PCIEX16 slot conforms to PCI Express 3.0 standard.)
      * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
      * The PCI Express x16 slots support up to PCI Express 3.0 standard when an Intel 22nm (Ivy Bridge) CPU is installed.
    2. 1 x PCI Express x16 slot, running at x4 (PCIEX4)
    3. 1 x PCI Express x1 slot
      (The PCIEX4 and PCIEX1 slots conform to PCI Express 2.0 standard.)
    4. 1 x PCI slot
  • Multi-Graphics Technology
    1. Support for AMD CrossFireX™ technology
      The PCIEX16 slot operates at up to x4 mode when AMD CrossFireX™ is enabled.
  • Storage Interface
    Chipset:
    1. 2 x SATA 6Gb/s connectors (SATA3 0/1) supporting up to 2 SATA 6Gb/s devices
    2. 4 x SATA 3Gb/s connectors (SATA2 2/3/4/5) supporting up to 4 SATA 3Gb/s devices
    3. Support for RAID 0, RAID 1, RAID 5, and RAID 10
      * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.
  • USB
    Chipset:
    1. Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
    2. Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
      * In Windows XP, the Intel USB 3.0 ports can support up to USB 2.0 transfer speed.
  • Internal I/O Connectors
    1. 1 x 24-pin ATX main power connector
    2. 1 x 4-pin ATX 12V power connector
    3. 2 x SATA 6Gb/s connectors
    4. 4 x SATA 3Gb/s connectors
    5. 1 x CPU fan header
    6. 1 x system fan header
    7. 1 x front panel header
    8. 1 x front panel audio header
    9. 1 x S/PDIF Out header
    10. 1 x USB 3.0/2.0 header
    11. 2 x USB 2.0/1.1 headers
    12. 2 x serial port headers
    13. 1 x parallel port
    14. 1 x debug card header
    15. 1 x Clear CMOS jumper
  • Back Panel Connectors
    1. 1 x PS/2 Keyboard port
    2. 1 x PS/2 mouse port
    3. 1 x D-Sub port
    4. 1 x DVI-D port
    5. 1 x optical S/PDIF Out connector
    6. 1 x HDMI port
    7. 1 x DisplayPort
    8. 2 x USB 3.0/2.0 ports
    9. 4 x USB 2.0/1.1 ports
    10. 1 x RJ-45 port
    11. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
  • I/O Controller
    1. iTE I/O Controller Chip
  • H/W Monitoring
    1. System voltage detection
    2. CPU/System temperature detection
    3. CPU/System fan speed detection
    4. CPU overheating warning
    5. CPU/System fan fail warning
    6. CPU/System fan speed control
      * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
  • BIOS
    Itens Inclusos
    SEM ESPELHO

    Características

    Características


    • Intel 1155: socket 1155

    Garantia

    Comentários

    Deixe seu comentário e sua avaliação







    - Máximo de 512 caracteres.

    Clique para Avaliar


    • Avaliação:
    Enviar
    Faça seu login e comente.

    Detalhes

    Marca: ITAUTEC Modelo: ST4273